ASTRODANCE

Each ASTRODANCE LED Floor module by LED Lite Vision is a floor created to produce stimulating and entertaining light shows and are highly durable.

ANIMATILE

Our ANIMATILE LED Floor series model by LED Lite Vision is a modular element that allows the creation of large digital lighting surfaces.

IKARO

The structure inside the IKARO LED Floor by LED Lite Vision is designed specifically for supporting heavy loads and also impacts received directly on the floor.

ASTRODANCE
Our ASTRODANCE LED Floor model by LED Lite Vision is a modular element that allows the creation of lighting surfaces.  Its based on a completey new technology coming from the visual communication world which has been adapted to the most demanding needs found in architectual and stage applications.

Each ASTRODANCE LED Floor module by LED Lite Vision is a floor created to produce stimulating and entertaining light shows and are highly durable. Does not require replacing an entire module or panel if a light goes out. Simply replace the one LED at a fraction of the cost of a LED video panel. Beautiful effects can be seen far away or close up. This LED dance floor cannot display video or graphics.

These floors are controlled with a DMX controller.

The structure inside the ASTRODANCE LED Floor by LED Lite Vision is designed specifically for supporting heavy loads and also impacts received directly on the floor.
A floor composed of several ASTRODANCE LED Floor modules by LED Lite Vision will be rigid and completely self-portable, also due to the structure making part of the framework inside.

The frontal cover protecting LEDs adds watertightness to the system.

LED COLOR CHASING TYPE DMX DANCE FLOOR

  • 720 pieces F10 LEDs
  • Color mixing
  • Color chasing
  • Control Mode: DMX
  • Master/Slave
  • Sound-active
  • 32Channels DMX
  • Cabinet with feet adjustable height
  • Dimension:1meter x 1meter x 110mm
  • Weigh per Cabinet: 32Kgs
  • Protection: IP55
  • Cabinet Material: Alloy Iron Base + 12mm Strong PC;
  • Each cabinet load capacity: Maximum weight 1000Kgs

LED DMX DANCE FLOOR

  • 432 pieces F10 LEDs
  • Color mixing
  • Control Mode: DMX
  • Master/Slave
  • Sound-active
  • 7Channels or 30Chanells DMX
  • Cabinet with feet adjustable height
  • Dimension:1meter x 1meter x 110mm
  • Weigh per Cabinet: 32Kgs
  • Protection: IP55
  • Cabinet Material: Alloy Iron Base + 12mm Strong PC
  • Each cabinet load capacity: Maximum weight 1000Kgs
ANIMATILE

IKARO
Our IKARO LED Floor model by LED Lite Vision is a modular element that allows the creation of large digital lighting surfaces.  Its based on a completey new technology coming from the visual communication world which has been adapted to the most demanding needs found in architectual and stage applications.
Each IKARO LED Floor module by LED Lite Vision it is a floor created to produce digital images and effects (Patent Pending).
The structure inside the IKARO LED Floor by LED Lite Vision is designed specifically for supporting heavy loads and also impacts received directly on the floor.
A floor composed of several IKARO LED Floor modules by LED Lite Vision will be rigid and completely self-portable, also due to the structure making part of the framework inside. The frontal cover protecting LEDs adds watertightness to the system.

  • With rubber-mixed mask, without Reflective light, anti-slip.
  • No screws in the front of Mask, better video effect.
  • Floor screen with rubber base stand ring, anti Shock design and less noise.
  • Only two screws fixed module on the back, easy maintenance.
Technical Parameters
LED Parameter
No. Item Luminous Intensity Viewing Angle(H/V) Wavelength Test Condition
1 Red LED 440-485 mcd 160º/160º 620-623nm 25℃,20mA
2 Green LED 2100-2310 mcd 160º/160º 520-523nm 25℃,20mA
3 Blue LED 470-520 mcd 160º/160º 467-470nm 25℃,20mA

Hardware parameters

1 Pixel Pitch 8.928mm
2 Physical Density 12544 pixels/m2
3 LED Type SMD3535
4 LED Configuration 3 in 1 (1R1G1B)
5 Cabinet Size 500mm×500mm×82mm
6 Module Area 0.25
7 Module Resolution 56×56
8 Weight 12KG/PC
8 Loading Capacity 2000kg/sqm
9 Drive Mode 1/4 scanning mode Constant Current
10 Brightness ≥3000 nit
11 View Angle 160°(H),160° (V)
12 Best View Distance 8mts – 100mts
13 Gray Scale 14bits
14 Maximum Consumption 200W/PC
15 Average Consumption 70W/PC
16 Operating Power Source 110/220V, 50~60 Hz
17 Refresh Rate ≥2000 Hz
18 Brightness Correction Pixel,Module,Cabinet Correction
19 Input Signal DVI
20 Control Mode Synchronization with PC
21 Control Distance UTP CAT5E:100m,Multi-Mode Fiber:500m,Single-Mode Fiber:15km
22 Stock Temperature (-40℃~+85℃)
23 Working Temperature ( -20℃~+50℃ )
24 Operating Humidity 10-90% RH
25 Life Span 50,000Hours
26 MTBF 5000Hours
27 Protection Rating IP65
28 Out Of Control Rate ≦0.0001

  • With rubber-mixed mask, without Reflective light, anti-slip.
  • No screws in the front of Mask, better video effect.
  • Floor screen with rubber base stand ring, anti Shock design and less noise.
  • Only two screws fixed module on the back, easy maintenance.
Technical Parameters
LED Parameter
No. Item Luminous Intensity Viewing Angle(H/V) Wavelength Test Condition
1 Red LED 440-485 mcd 160º/160º 620-623nm 25℃,20mA
2 Green LED 2100-2310 mcd 160º/160º 520-523nm 25℃,20mA
3 Blue LED 470-520 mcd 160º/160º 467-470nm 25℃,20mA

Hardware parameters

1 Pixel Pitch 10.42mm
2 Physical Density 9216 pixels/m2
3 LED Type SMD3535
4 LED Configuration 3 in 1 (1R1G1B)
5 Cabinet Size 500mm×500mm×82mm
6 Module Area 0.25
7 Module Resolution 48×48
8 Weight 12KG/PC
8 Loading Capacity 2000kg/sqm
9 Drive Mode 1/4 scanning mode Constant Current
10 Brightness ≥2500 nit
11 View Angle 160°(H),160° (V)
12 Best View Distance 10mts – 100mts
13 Gray Scale 14bits
14 Maximum Consumption 150W/PC
15 Average Consumption 50W/PC
16 Operating Power Source 110/220V, 50~60 Hz
17 Refresh Rate ≥2000 Hz
18 Brightness Correction Pixel,Module,Cabinet Correction
19 Input Signal DVI
20 Control Mode Synchronization with PC
21 Control Distance UTP CAT5E:100m,Multi-Mode Fiber:500m,Single-Mode Fiber:15km
22 Stock Temperature (-40℃~+85℃)
23 Working Temperature ( -20℃~+50℃ )
24 Operating Humidity 10-90% RH
25 Life Span 50,000Hours
26 MTBF 5000Hours
27 Protection Rating IP65
28 Out Of Control Rate ≦0.0001

  • With rubber-mixed mask, without Reflective light, anti-slip.
  • No screws in the front of Mask, better video effect.
  • Floor screen with rubber base stand ring, anti Shock design and less noise.
  • Only two screws fixed module on the back, easy maintenance.
Technical Parameters
LED Parameter
No. Item Luminous Intensity Viewing Angle(H/V) Wavelength Test Condition
1 Red LED 440-485 mcd 160º/160º 620-623nm 25℃,20mA
2 Green LED 2100-2310 mcd 160º/160º 520-523nm 25℃,20mA
3 Blue LED 470-520 mcd 160º/160º 467-470nm 25℃,20mA

Hardware parameters

1 Pixel Pitch 17.85mm
2 Physical Density 12544 pixels/m2
3 LED Type SMD3535
4 LED Configuration 3 in 1 (1R1G1B)
5 Cabinet Size 500mm×500mm×82mm
6 Module Area 0.25
7 Module Resolution 56×56
8 Weight 12KG/PC
8 Loading Capacity 2000kg/sqm
9 Drive Mode 1/4 scanning mode Constant Current
10 Brightness ≥3000 nit
11 View Angle 160°(H),160° (V)
12 Best View Distance 15mts – 100mts
13 Gray Scale 14bits
14 Maximum Consumption 200W/PC
15 Average Consumption 70W/PC
16 Operating Power Source 110/220V, 50~60 Hz
17 Refresh Rate ≥2000 Hz
18 Brightness Correction Pixel,Module,Cabinet Correction
19 Input Signal DVI
20 Control Mode Synchronization with PC
21 Control Distance UTP CAT5E:100m,Multi-Mode Fiber:500m,Single-Mode Fiber:15km
22 Stock Temperature (-40℃~+85℃)
23 Working Temperature ( -20℃~+50℃ )
24 Operating Humidity 10-90% RH
25 Life Span 50,000Hours
26 MTBF 5000Hours
27 Protection Rating IP65
28 Out Of Control Rate ≦0.0001

  • With rubber-mixed mask, without Reflective light, anti-slip.
  • No screws in the front of Mask, better video effect.
  • Floor screen with rubber base stand ring, anti Shock design and less noise.
  • Only two screws fixed module on the back, easy maintenance.
Technical Parameters
LED Parameter
No. Item Luminous Intensity Viewing Angle(H/V) Wavelength Test Condition
1 Red LED 440-485 mcd 160º/160º 620-623nm 25℃,20mA
2 Green LED 2100-2310 mcd 160º/160º 520-523nm 25℃,20mA
3 Blue LED 470-520 mcd 160º/160º 467-470nm 25℃,20mA

Hardware parameters

1 Pixel Pitch 20.83mm
2 Physical Density 12544 pixels/m2
3 LED Type SMD3535
4 LED Configuration 3 in 1 (1R1G1B)
5 Cabinet Size 500mm×500mm×82mm
6 Module Area 0.25
7 Module Resolution 56×56
8 Weight 12KG/PC
8 Loading Capacity 2000kg/sqm
9 Drive Mode 1/4 scanning mode Constant Current
10 Brightness ≥3000 nit
11 View Angle 160°(H),160° (V)
12 Best View Distance 18mts – 100mts
13 Gray Scale 14bits
14 Maximum Consumption 200W/PC
15 Average Consumption 70W/PC
16 Operating Power Source 110/220V, 50~60 Hz
17 Refresh Rate ≥2000 Hz
18 Brightness Correction Pixel,Module,Cabinet Correction
19 Input Signal DVI
20 Control Mode Synchronization with PC
21 Control Distance UTP CAT5E:100m,Multi-Mode Fiber:500m,Single-Mode Fiber:15km
22 Stock Temperature (-40℃~+85℃)
23 Working Temperature ( -20℃~+50℃ )
24 Operating Humidity 10-90% RH
25 Life Span 50,000Hours
26 MTBF 5000Hours
27 Protection Rating IP65
28 Out Of Control Rate ≦0.0001